1G
Fuel Filter Removal and Installation
NOTE:
Fuel filter can not disassemble.
Replace fuel filter as an assembly, if necessary.
Removal
1) Disconnect negative (–) cable at battery.
2) Pull out fuel hoses (1) with pushing lock button (2).
3) Install plugs (special tool) to openings of fuel filter (3) and fuel hose (1) in order to prevent its internal parts from dust.
For detail, refer to “Precaution” under Fuel Delivery System Description:K9K .
4) Remove fuel filter (3) from its bracket.
Installation
Reverse removal procedure for installation noting the following.
• Bleed air in system referring to Air Bleeding of Fuel System:K9K .
• Start engine and check that there are no fuel leakage.