1G
Fuel Level Gauge Assembly Removal and Installation
WARNING:
Before starting the following procedure, be sure to observe Precautions on Fuel System Service:K9K .
CAUTION:
Do not disassemble fuel level gauge assembly. Disassembly will spoil its original performance.
Removal
1) Remove fuel tank from vehicle referring to Fuel Tank Removal and Installation:K9K .
2) Remove fuel level gauge (1) from fuel tank (2).
Installation
CAUTION:
When connecting joint, clean outside surface of pipe where joint is to be inserted, push joint into pipe till joint lock clicks and check to ensure that pipes are connected securely, or fuel leak may occur.
1) Clean mating surfaces of fuel level gauge (1) and fuel tank.
2) Install new gasket (2) and plate (3) to fuel level gauge (1), and then install fuel level gauge to fuel tank.
Tightening torque
Fuel level gauge bolt ( a ): 10.5 N·m ( 1.05 kg-m, 7.5 lb-ft)
3) Install fuel tank to vehicle referring to Fuel Tank Removal and Installation:K9K .