Fuel Injector On-Vehicle Inspection - Suzuki Jimny Workshop Manual
1G
Fuel Injector On-Vehicle Inspection
1)
Using sound scope (1) or such, check operating sound of injector (2) when engine is running or cranking.
Cycle of operating sound should vary according to engine speed.
If no sound or an unusual sound is heard, check injector circuit (wire or connector) or injector (2).
Cycle of operating sound should vary according to engine speed.
If no sound or an unusual sound is heard, check injector circuit (wire or connector) or injector (2).
2)
Disconnect connector (1) from injector, connect ohmmeter between terminals of injector and check resistance.
If resistance is out of specification, replace.
If resistance is out of specification, replace.
Resistance of fuel injector
10.5 – 14.0 Ω at 20 °C, 68 °F
3)
Connect connector to injector securely.