Radiator Cooling Fan Removal and Installation - Suzuki Jimny Workshop Manual

1) Disconnect negative (–) cable at battery.

2) Remove engine hanger (1) and accessory belt cover (2).

3) Recovery refrigerant from A/C system referring to “Recovery” under Operation Procedure for Refrigerant Charging .

4) Remove A/C suction pipe and condenser outlet pipe referring to Air Flow Diagram of A/C System .

5) Detach P/S reservoir from its bracket.

6) Drain coolant from cooling system referring to Cooling System Draining:K9K .

7) Disconnect radiator inlet hose No.2 and ventilation hose from radiator.

8) Disconnect cooling fan motor connector (1).

9) Remove radiator cooling fan (2).

1) Install radiator cooling fan (2).

2) Connect cooling fan motor connector (1).

3) Connect radiator inlet hose No.2 and ventilation hose to radiator.

4) Install P/S reservoir to its bracket.

5) Install A/C suction pipe and condenser outlet pipe referring to Air Flow Diagram of A/C System .

6) Install engine hanger (1) and accessory belt cover (2).

7) Connect negative (–) cable at battery.

8) Refill cooling system with coolant referring to Cooling System Refill:K9K .

9) Recharge A/C system with refrigerant referring to Operation Procedure for Refrigerant Charging .

10) Check to make sure that there is no coolant leakage and A/C refrigerant leakage at each connection.