Tightening Torque Specifications - Suzuki Jimny Workshop Manual
1E
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Oil pressure switch | 35 | 3.5 | 25.5 |
 |
| Heat exchanger bolt | 45 | 4.5 | 32.5 |
|
| Oil filter unit bracket bolt | 45 | 4.5 | 32.5 |
|
| Oil pan baffle plate bolt | 8 | 0.8 | 6.0 |
|
| Upper oil pan bolt | Tighten 6 N·m (0.6 kgf-m, 4.5 lbf-ft) and 16 N·m (1.6 kgf-m, 12.0 lbf-ft) by the specified procedure |
|
||
| Oil pump strainer bolt | 12 | 1.2 | 9.0 |
|
| Lower oil pan bolt | Tighten 12 N·m (1.2 kgf-m, 9.0 lbf-ft) by the specified procedure |
|
||
| Engine mounting bracket bolt | 40 | 4.0 | 29.0 |
|
| Accessory bracket bolt | 28 | 2.8 | 20.5 |
|
| Engine mounting nut | 55 | 5.5 | 40.0 |
|
| Engine oil drain plug | 35 | 3.5 | 25.5 |
|
| Transmission to engine bolt | 55 | 5.5 | 40.0 |
|
| Oil level gauge nut | 21 | 2.1 | 15.5 |
|
| Oil pump bolt | 25 | 2.5 | 18.0 |
|
| Gasket holder plate bolt | Tighten 11 N·m (1.1 kgf-m, 8.0 lbf-ft) by the specified procedure |
|
||
NOTE:
The specified tightening torque is also described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.