1E
Oil Pump and Oil Pump Chain Removal and Installation
Reference: Oil Pump and Oil Pump Chain Components:K9K
Removal
1) Remove engine assembly from vehicle referring to Engine Assembly Removal and Installation:K9K .
2) Remove upper oil pan referring to Oil Pan and Oil Pump Strainer Removal and Installation:K9K .
3) Remove oil pump (1) from cylinder block.
4) Remove timing belt referring to Timing Belt and Belt Tensioner Removal and Installation:K9K .
5) Remove gasket holder plate (1).
6) Remove gasket holder plate oil seal (2).
7) Remove oil pump chain (1) and oil pump drive sprocket (2).
Installation
Reference: Oil Pump and Oil Pump Chain Inspection:K9K
1) Install oil pump (1), oil pump chain (2) and oil pump drive sprocket all together.
Tighten oil pump bolts to specified torque.
Tightening torque
Oil pump bolt ( a ): 25 N·m ( 2.5 kg-m, 18.0 lb-ft)
2) Install gasket holder plate (1) to cylinder block with new gasket and tighten gasket holder plate bolts as follows.
a) Tighten gasket holder plate bolts (“1” and “6”) to 11 N·m (1.1 kg-m, 8.0 lbf-ft).
b) Tighten gasket holder plate bolts (“2”, “3”, “4” and “5”) to 11 N·m (1.1 kg-m, 8.0 lbf-ft).
Tightening torque
Gasket holder plate bolt ( a ): Tighten 11 N·m (1.1 kgf-m, 8.0 lbf-ft) by the specified procedure
3) Install upper oil pan and lower oil pan referring to Oil Pan and Oil Pump Strainer Removal and Installation:K9K .
4) Install new gasket holder plate oil seal (1) to gasket holder plate using special tool as follows.
CAUTION:
Do not touch oil seal (1) so that it is extremely fragile.
Be sure to install new oil seal using special tool (A), (B) and protector (2) supplied with new oil seal. If it doesn't follow the above-mentioned service, it may cause oil leak from oil seal.
Special Tool
(A) : 09911–98130
(B) : 09911–98140
3. Bolt 5. Installer 7. Bolt (not necessary)
4. Spacer 6. Nut      
a) Install bolt (3) and spacer (4) of special tool to crankshaft.
b) Install protector (2) together with new oil seal (1) to spacer (4).
c) Install oil seal installer (5) to bolt (3).
d) Tighten nut (6) of special tool until oil seal installer (5) comes into contact with gasket holder plate (7).
e) Remove special tool and protector (2).
5) Install timing belt referring to Timing Belt and Belt Tensioner Removal and Installation:K9K .
6) Install engine assembly to vehicle referring to Engine Assembly Removal and Installation:K9K .