1E
Oil Pressure Switch Removal and Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Detach degassing tank from its bracket.
3) Disconnect oil pressure switch connector (1).
4) Remove oil pressure switch (2).
Installation
1) Install oil pressure switch (1) with new gasket.
2) Tighten oil pressure switch (1) to specified torque.
Tightening torque
Oil pressure switch ( a ): 35 N·m ( 3.5 kg-m, 25.5 lb-ft)
3) Connect oil pressure switch connector (2).
4) Install degassing tank to its bracket.
5) Start engine and check for oil leakage.