[A]: | Sealant application amount | 7. | Relief valve |
“a”: | 3 mm (0.12 in.) |
8.
|
Spring |
“b”: | 2 mm (0.08 in.) | 9. | Retainer |
1. | Rotor plate | 10. | Circlip |
2.
|
Outer rotor | 11. | Oil pump mounting bolt |
3. | Inner rotor | 12. |
Timing chain cover mounting bolts
|
4. |
Timing chain cover
: Apply sealant 99000-31140 to the mating surface of cylinder and cylinder head. : Apply sealant 99000-31250 to mating surface of timing chain cover referring to the figure of Step 1) in “Installation” of Timing Chain Cover Removal and Installation:M13A . |
: | Tightening torque |
5. | Pin | : | Do not reuse. |
6. | Oil seal | : | Apply thin coat of engine oil to sliding surface of each parts. |
[A]: | Sealant application amount |
6.
|
Relief valve |
“a”: | 3 mm (0.12 in.) |
7.
|
Spring |
“b”: | 2 mm (0.08 in.) | 8. | Retainer |
1. | Rotor plate | 9. | Circlip |
2. | O ring | : | Tightening torque |
3.
|
Outer rotor | : | Do not reuse. |
4.
|
Inner rotor | : | Apply thin coat of engine oil to sliding surface of each parts. |
5. | Rotor plate bolt |