Oil Control Valve Inspection (For Engine with VVT) - Suzuki Jimny Workshop Manual
1D
Oil Control Valve Inspection (For Engine with VVT)
1)
Inspect strainer (1) and mating surface (2) of oil control valve for clog or damage.
Clean oil control valve if clog or foreign matter is present on strainer or mating surface of oil control valve.
Replace oil control valve if its mating surface is damaged.
Clean oil control valve if clog or foreign matter is present on strainer or mating surface of oil control valve.
Replace oil control valve if its mating surface is damaged.
2)
Check resistance between terminals of oil control valve.
If resistance is out of specification, replace oil control valve.
If resistance is out of specification, replace oil control valve.
Oil control valve resistance
6.7 – 7.7 Ω (at 20 °C (68 °F))