1D
Accelerator Cable Adjustment
1) With throttle valve closed, check accelerator pedal play which should be within following specification.
If measured value is out of specification, adjust it to specification with cable adjusting nut (1).
Accelerator pedal play
“a”: 2 – 7 mm (0.08 – 0.27 in.)
2) With accelerator pedal depressed fully, check clearance between throttle lever (2) an lever stopper (3) (throttle body) witch should be within following specification.
If measured value is out of specification, adjust it to specification by changing height of pedal stopper bolt (1).
Accelerator cable adjustment clearance (with pedal depressed fully)
“a”: 0.5 – 2.0 mm (0.02 – 0.07 in.)