1C
MAF and IAT Sensor Removal and Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Disconnect MAF and IAT sensor connector (1).
3) Disconnect air cleaner outlet hose (2) from MAF and IAT sensor (3).
4) Remove MAF and IAT sensor (3) from air cleaner case.
Installation
Reference: MAF and IAT Sensor Inspection:K9K
Reverse removal procedure for installation noting the following.
• Clean mating surfaces of MAF and IAT sensor and air cleaner case.
• Tighten MAF and IAT sensor bolts to specified torque.
Tightening torque
MAF and IAT sensor bolt ( a ): 6 N·m ( 0.6 kg-m, 4.5 lb-ft)