Crankshaft Position (CKP) Sensor (Engine Speed Sensor) Removal and Installation
1) Disconnect negative (–) cable at battery.
2) Remove exhaust pipe and exhaust pipe bracket referring to Exhaust System Components:K9K .
3) Remove CKP sensor cover (1).
4) Disconnect CKP sensor connector (2).
5) Remove CKP sensor (3) from transmission case.
Reverse removal procedure for installation noting the following.
Clean CKP sensor and sensor rotor teeth before installation.
Tighten CKP sensor bolts to specified torque.
Tightening torque
CKP sensor bolt ( a ): 12 N·m ( 1.2 kg-m, 4.0 lb-ft)