1C
APP Sensor Removal and Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Disconnect connector (1) from APP sensor by pulling the lock lever (2).
3) Remove accelerator pedal assembly (3) from accelerator pedal bracket.
Installation
Reference: APP Sensor Inspection:K9K
Reverse removal procedure for installation noting the followings.
• Connect APP sensor connector securely.
• Tighten accelerator pedal assembly mounting bolts to specified torque.
Tightening torque
Accelerator pedal mounting bolt ( a ): 6 N·m ( 0.6 kg-m, 4.5 lb-ft)