Mass Air Flow (MAF) and Intake Air Temperature (IAT) Sensor Removal and Installation
Do not disassemble MAF and IAT sensor.
Do not expose MAF and IAT sensor to any shock.
Do not cleansing MAF and IAT sensor.
If MAF and IAT sensor has been dropped, it should be replaced.
Do not below compressed air by using air gun or the like.
Do not put finger or any other object into MAF and IAT sensor. Malfunction may occur.
1) Disconnect negative cable at battery.
2) Disconnect MAF and IAT sensor coupler (1).
3) Remove MAF and IAT sensor (2) from air cleaner assembly.
Reverse removal procedure noting the followings.
Tighten MAF and IAT sensor screws to specified torque.
Tightening torque
MAF and IAT sensor screw ( a ): 1.5 N·m ( 0.15 kg-m, 1.1 lb-ft)
Connect MAF and IAT sensor coupler securely.