Intake Air Temperature (IAT) Sensor Removal and Installation (Without VVT) - Suzuki Jimny Workshop Manual
Home
Home
1C
Intake Air Temperature (IAT) Sensor Removal and Installation (Without VVT)
Removal
1)
Disconnect battery negative cable at battery.
2)
Disconnect connector from IAT sensor (1).
3)
Remove IAT sensor (1) from air cleaner case (2).
Installation
Reference: Intake Air Temperature (IAT) Sensor Inspection:M13A
Reverse removal procedure noting the followings.
•
Clean mating surfaces of IAT sensor and air cleaner case.
•
Connect IAT sensor connector (1) securely.
Home