1C
Main Relay, Fuel Pump Relay, A/C Compressor Relay and A/C Condenser Fan Control Relay Inspection
1) Disconnect negative cable at battery.
2) Remove main relay (1), fuel pump relay (2) A/C compressor relay (3) and/or A/C condenser fan control relay (4) from relay box.
3) Check that there is no continuity between terminal “A” and “B”. If there is continuity, replace relay.
4) Connect battery positive (+) terminal to terminal “C” of relay. Connect battery negative (–) terminal “D” of relay. Check continuity between terminal “A” and “B”. If there is no continuity when relay is connected to the battery, replace relay.