1C
Camshaft Position (CMP) Sensor Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Disconnect connector from CMP sensor.
3) Remove CMP sensor from timing chain cover (engine not equipped VVT system) or cylinder head (engine equipped with VVT system).
Installation
Reference: Camshaft Position (CMP) Sensor Inspection:M13A
1) Install camshaft position sensor to timing chain cover (engine not equipped VVT system) or cylinder head (engine equipped with VVT system).
Tightening torque
Camshaft position sensor bolt ( a ): 10 N·m ( 1.0 kg-m, 7.5 lb-ft)
[A]: Engine not equipped with VVT system
[B]: Engine equipped with VVT system
1. EGR valve
2) Connect connector to it securely.
3) Connect negative cable to battery.