Throttle Position (TP) Sensor Removal and Installation
1) Remove throttle body from intake manifold referring to Throttle Body Removal and Installation:M13A .
2) Remove TP sensor from throttle body.
1) Install TP sensor (1) to throttle body.
Fit TP sensor to throttle body in such way that its holes (3) are a little away from TP sensor screw holes (2) and turn TP sensor clockwise so that those holes align.
Tightening torque
TP sensor screw ( a ): 2.5 N·m ( 0.25 kg-m, 1.8 lb-ft)
2) Connect connector to TP sensor securely.
3) Connect battery negative cable to battery.