1A
DTC P062F: Control Module EEPROM Failure
NOTE:
If DTC P062F is detected, engine speed forced 1300 rpm.
Detecting Condition
NOTE:
Generic scan tool displays status with * mark only.
Status displayed on SUZUKI scan tool Detecting condition Indicator / Warning light operation
D1 Write EEPROM fault Injection warning light (gravity 1 fault) light up
*D2 Read EEPROM fault MIL and injection warning light (gravity 1 fault) light up
Troubleshooting
Check the connection and condition of the ECM connectors.
Repair if necessary.
If DTC P062F is still detected, replace the ECM.
After Repair
Deal with any faults detected by SUZUKI scan tool.
Clear the DTC.
Carry out a road test followed by another check with the SUZUKI scan tool.