Visual Inspection
Visually check the following parts and systems.
Inspection item Referring section
Engine oil – level, leakage
Engine Oil and Filter Change
Engine coolant – level, leakage
Engine Coolant Change
Fuel – level, leakage
Fuel Lines and Connections Inspection
Air cleaner element – dirt, clogging
Air Cleaner Filter Inspection
Battery – fluid level, corrosion of terminal
Battery Description:K9K
Drive belt – tension, damage
Drive Belt (Engine Accessory Drive Belt) Inspection
Vacuum hoses of air intake system – disconnection, looseness, deterioration, bend
Vacuum Hose Inspection:M13A
Connectors of electric wire harness – disconnection, friction
Fuses – burning
Parts – installation, bolt – looseness
Parts – deformation
Other parts that can be checked visually
Also add the following items at engine start, if possible.
Malfunction indicator lamp – Operation
Malfunction Indicator Lamp (MIL) Check:K9K
Glow plug indicator light and injection warning light – Operation
Glow Indicator Light and Injection Warning Light (Gravity 1 Fault) Check:K9K
Red stop warning light – Operation
Red Stop Warning Light (Gravity 2 Fault) Check:K9K
Charge warning lamp – Operation
Generator Symptom Diagnosis:K9K
Engine oil pressure warning lamp – Operation
Oil Pressure Light Symptom Diagnosis
Engine coolant temp. meter – Operation
Engine Coolant Temperature (ECT) Meter and Sensor Symptom Diagnosis
Fuel level meter – Operation
Fuel Meter and Fuel Gauge Unit Symptom Diagnosis
Abnormal air being inhaled from air intake system
Exhaust system – leakage of exhaust gas, noise
Exhaust System Inspection
Other parts that can be checked visually