1A
Engine has no power
Perform troubleshooting referring to the followings when ECM has detected no DTC and no abnormality has been found in Visual Inspection:M13A without VVT and Engine Basic Inspection:M13A without VVT .
Condition Possible Cause Action
Engine has no power
Engine overheating
Condition “Engine overheating”
Faulty ignition coil
Ignition Coil Assembly (Including ignitor) Inspection:M13A
Faulty knock sensor
Knock Sensor Inspection:M13A
Fuel pressure out of specification
Fuel Pressure Check:M13A without VVT
Faulty injector
Fuel Injector Circuit Check:M13A without VVT
Faulty TP sensor, ECT sensor or MAP sensor
Throttle Position (TP) Sensor On-Vehicle Inspection:M13A , Engine Coolant Temperature (ECT) Sensor Inspection:M13A or Manifold Absolute Pressure (MAP) Sensor Inspection:M13A
Faulty ECM
Inspection of ECM and Its Circuits:M13A without VVT
Malfunctioning EGR valve (if equipped)
EGR Valve Inspection:M13A
Maladjusted accelerator cable play
Accelerator Cable Adjustment:M13A
Low compression
Compression Check:M13A
Dragging brakes
Condition “Dragging brakes” in Brakes Symptom Diagnosis
Slipping clutch
Condition “Slipping clutch” in Clutch System Symptom Diagnosis:M13A Model