Power Steering (P/S) System Inspection (If Equipped) - Suzuki Jimny Workshop Manual
0B
Power Steering (P/S) System Inspection (If Equipped)
1)
Visually check power steering system for fluid leakage and hose for damage and deterioration.
Repair or replace defective parts, if any.
Repair or replace defective parts, if any.
| [A]: | M13A engine model |
| [B]: | K9K engine model |
2)
M13A engine model
With engine stopped, check fluid level indicated on fluid tank or level gauge of tank cap, which should be between “MAX” and “MIN” marks. If it is lower than “MIN”, fill fluid up to “MAX” mark.
K9K engine model
With engine stopped, check fluid level indicated on fluid tank (1), which should be between “UPPER” and “LOWER” marks. If it is lower than “LOWER”, fill fluid up to “UPPER” mark.
With engine stopped, check fluid level indicated on fluid tank or level gauge of tank cap, which should be between “MAX” and “MIN” marks. If it is lower than “MIN”, fill fluid up to “MAX” mark.
K9K engine model
With engine stopped, check fluid level indicated on fluid tank (1), which should be between “UPPER” and “LOWER” marks. If it is lower than “LOWER”, fill fluid up to “UPPER” mark.
NOTE:
•
Be sure to use an equivalent of DEXRON®-II, DEXRON®-IIE or DEXRON®-III for P/S fluid.
• Fluid level should be checked when fluid is cool.
• Fluid level should be checked when fluid is cool.
| [A]: | M13A engine model |
| [B]: | K9K engine model |
3)
Visually check pump drive belt for cracks and wear.
4)
Check belt for tension, referring to
Drive Belt (Engine Accessory Drive Belt) Inspection
and/or
Drive Belt (Engine Accessory Drive Belt) Replacement
.
If necessary, have belt adjusted or replaced.
If necessary, have belt adjusted or replaced.