Transfer and Differential Oil Inspection - Suzuki Jimny Workshop Manual
0B
Transfer and Differential Oil Inspection
1)
Check transfer case or differential for evidence of oil leakage.
Repair leaky point if any.
Repair leaky point if any.
2)
Make sure that vehicle is placed level for oil level check.
3)
Remove level plug (1) of transfer and differentials (front and rear) and check oil level.
Oil level can be checked roughly by means of level plug hole. That is, if oil flows out of level plug hole or if oil level is found up to hole when level plug is removed, oil is properly filled.
If oil is found insufficient, pour specified amount of specified oil.
Oil level can be checked roughly by means of level plug hole. That is, if oil flows out of level plug hole or if oil level is found up to hole when level plug is removed, oil is properly filled.
If oil is found insufficient, pour specified amount of specified oil.
CAUTION:
Hypoid gear oil must be used for differential.
| [A]: | Transfer | [C]: | Rear differential |
| [B]: | Front differential | 2. | Drain plug (Apply sealant) |
4)
Tighten level plug to specified torque.
Refer to Transfer Gear Oil Change , Front Differential Gear Oil Inspection and Change:Front and Rear Differential Gear Oil Inspection and Change:Rear .
Refer to Transfer Gear Oil Change , Front Differential Gear Oil Inspection and Change:Front and Rear Differential Gear Oil Inspection and Change:Rear .