0B
Suspension System Inspection
Check suspension bolts and nuts for tightness and retighten them as necessary.
Repair or replace defective parts, if any.
NOTE:
For details of check points, refer to tables of Tightening Torque Specifications and Tightening Torque Specifications .
Front
1) Check stabilizer bar (6) for damage or deformation.
2) Check bushing (8) for damage, wear or deformation.
3) Check coil spring (1), lateral rod (5) and leading arm (3) for deformation and damage.
4) Check lateral rod (5) and leading arm bushings for wear, damage and deterioration.
5) Inspect absorbers (2) for evidence of oil leakage, dents or any other damage on sleeves; and inspect anchor ends for deterioration.
6) Inspect for cracks or deformation in spring seat.
7) Inspect for deterioration of bump stopper.
4. Front axle housing
7. Ball joint
Rear
1) Check shock absorber (1) for damage, deformation, oil leakage and operation.
2) Check bushings for wear and damage.
3) Check coil spring (4), trailing arm (6) and lateral rod (5) for deformation and damage.
4) Check trailing arm (6) and lateral rod bushings and bump stopper (2) for wear, damage and deterioration.
5) Check other suspension parts for damage, loose or missing parts; also for parts showing signs of wear or lack of lubrication.
3. Spring seat
Replace any parts found defective in Step 1) to 5).